Top-rated independent heating and cooling across North Texas and the Metroplex

Gas Furnace Repair in Richardson, TX

Smell gas or suspect carbon monoxide? Leave the house, then call 911 or your gas utility from outside before you call anyone else. Once the line is safe, gas furnace repair across Richardson is our work: ignitors that glow but never light, flame sensors coated in residue, pressure switches held open by a blocked flue, blower motors that run long after the burners drop out. We test the sequence in order instead of guessing at parts. Phone us or fill in the quote form and we will schedule a visit.

Call (888) 878-4879

Real people on the phone
7 days a week
Quote in writing before any work

Taking calls until 5:00 PM CT

We repair all major brandsCarrier Trane Lennox Goodman Rheem York American Standard Bryant

The symptoms that lead here in Richardson

Some rooms are freezing and others are fine Blower or capacitor weakness, closed dampers, duct leakage in the attic run
The furnace blows but the air is cool Burners not lighting, failed ignitor or flame sensor, or gas valve fault
It fires up, runs a minute, then shuts off Short cycling from a dirty flame sensor, blocked flue or overheating on restricted airflow

What We Check On A No Heat Call

We start at the thermostat and the breaker, then move to the filter and return air, because starved airflow trips high limits and mimics a dozen other faults. From there we inspect the igniter, flame sensor, pressure switch and inducer, the rollout and limit safeties, the gas valve, and the heat exchanger for cracking or flame disturbance. In attic installations across the region we also check the condensate drain and the secondary pan, since a blocked drain can shut the whole unit down.

How We Decide Repair Is The Right Call

Repair makes sense when the failure is a single component, the heat exchanger is sound, and the rest of the furnace still runs within spec. We tell you plainly when it is not. A cracked or compromised heat exchanger is a combustion safety issue, and we shut the unit down rather than patch around it. Repeated part failures on an older furnace usually mean something upstream, like duct restriction or an undersized return, and we would rather fix the cause than sell you the same part again.

Richardson coverage

From Richardson we also cover Plano, Garland, Murphy, Sachse, Wylie, Allen and the surrounding communities.

75082
75083
75085
75086
75093
75094
75001
75002

Related furnace repair work in Richardson

All furnace repair in Richardson → · Gas Furnace Repair across the region →

The same on every visit

You approve a written quote first

Covering 105 cities across Louisiana, Oklahoma, Texas.

You reach a person, not a menu

Open 7 days, 8:00 AM to 5:00 PM CT.

Every major brand, gas and electric

Carrier, Trane, Lennox, Goodman and more. We are not an authorized dealer for any of them.

Gas Furnace Repair in Richardson — quick answers

My furnace lights then shuts off after a minute. What is that?

That pattern usually points to a dirty flame sensor, a flue or pressure switch problem, or airflow so restricted that a high limit opens. Change the filter, confirm your vents are open, then call us to test the safeties.

Is a yellow or lazy burner flame a problem?

It can be. Healthy gas burner flames are steady and mostly blue. Yellow, rolling or flickering flames suggest a combustion or venting issue that needs a technician the same day. Do not adjust anything yourself, and call us.

How soon can you get to my Richardson home?

Call us with your address and a quick description of the problem and we will give you the next available window, usually same day or next day during cooling season. If your AC is out and the house is climbing, say so when you call so we can prioritize it. We work Richardson daily, so we are rarely far away.

How it works

Step 1
Tell us the symptom
Call or fill in the quote form with what you hear, smell or feel. Warm air, short cycling, a breaker that keeps tripping. Details on your porch help us arrive with the right parts.
Step 2
We diagnose on site
A technician checks the thermostat, airflow, the indoor coil and blower, then the outdoor unit and electrical side. You get a plain explanation of what failed and why it failed.
Step 3
You approve the repair
We walk you through the fix and any parts involved before we start. Once you say go, we make the repair and confirm the system is holding temperature before we leave your driveway.

Call (888) 878-4879

A real person answers
Open 7 days
Written quote before work starts

Why homeowners call us

Built for hard summersWe work on attic air handlers in July heat, undersized returns in older subdivisions, and condensers with hail-flattened fins. Those are everyday jobs across the region, so we know where these systems tend to give out first.
Air conditioner repair and heating repairOne crew for both seasons. Air conditioning repair when the house won't cool, heater repair and furnace repair when the burners won't stay lit. Same technicians, same records, so nobody starts from scratch in November.
We explain the failureYou hear which component failed and what it was doing to the rest of the system. If a repair is a short-term patch on an aging unit, we say so and let you decide the timing.
Respect for the houseDrop cloths, shoe covers, and the attic hatch closed the way we found it. We keep the work area clean and we tell you honestly when a problem is airflow or ductwork rather than the equipment itself.
All major brands, gas & electricOne independent crew for Carrier, Trane, Lennox, Goodman, Rheem and more.
Straight answersIf a system is not worth repairing, we say so, often right on the phone.